Ulmia 354 Miter Box Saw

Ulmia Model 352. blade length 550mm (21 5/8"), cutting height 100mm ( 3 15/16"), kerf at 90 degrees 160mm (6 5/16"), kerf at 45 degrees 100mm (3 15/16").

The Ulmia Miter Box Saw is without equal in quality and accuracy.

The heavy cast iron table and pivot rail are joined by a large steel pivot pin.

The pivot rail has a spring mounted setting pawl which solidly engages the machined detents for setting 90, 45, 36, 30, and 22.5 degree angles on both sides of the blade.

Other angles may be fixed by setting with template and tightening a small hex bolt at the rear of the table.

There are no angle markings on the saw table.

Four nickel plated bars are pressed into the pivot rail to support and guide the "guide-pushers" which guide the buck saw blade.

The buck saw is a highly stable and lightweight design composed of a burnished tension rod, galvanized reinforcing tube, steel saw arm, aluminum handle with plastic grip.

Four different blades are available and can be changed quickly with the oversized wing nut at the base of the handle.

The saw is shipped with the 15tpi fine wood blade.

Also available are a 10 tpi wood cutting, a 13 tpi Japanese-style pull-blade, and a 25tpi metal cutting blade.

The included length adjuster is easy to use and adjust for repeat cuts.

The footboard made of steamed Red Beech allows the saw to be mounted on the workbench by means of bench dogs or other clamps.

A complete selection of spare parts are available, the more common ones are kept in stock.

 Guide pushers are fiber reinforced plastic on this saw. This saw is a miter-only saw and will not make compound (angle plus bevel) cuts.

Condition: Used

Usage: Tools

Location: Calgary